Since Pioneer introduced Blu Ray Burner technology, everyone seems to be pioneering toward understanding what makes this technology so unique.

Pioneer – Blu Ray Burner
The powerful drives are the original burners for computers, which allow the user to copy and burn Blu-ray files to disc. Some of the systems may have limited extras, yet the appealing system cannot be left unexplored. Packed in the systems is 25 Gigabytes on 1^st edition that it has only a single write-once disc. The most recent Blu Ray burner has a single lens that is optical and it picks up with dual lasers. One of the lasers is fully able to read and write your Blu-ray discs (BD) while the red laser can read and write your media from DVD.

There is a BluRay burner that cannot read nor write your CDs or nor can it write to your double layered BD media with 50 Gigabytes’. However, lots of models are capable of writing double layers of BD. Therefore, it depends on the type of Blu Ray burners you consider.

The Discs
The discs on these systems are in competition with common DVDs. According to the latest news, Blu Ray burner is attempting to replace your discs by replacing it with blue laser technology, which provides you with more storage capacity combined with 25 Gigs of single-layer discs that use the most-up-to-the-minute disc structures.

Will BluRay burners technology take over DVD? Who knows, but one thing for sure the price of DVDs is a lot less, which means until technology designs the exact systems that everyone can afford, DVDs will still be in.

You can see DVDFab 6218 update below.

• New: Command line are fully supported, please read Commandline.txt in installation folder.
• New: Updated language files.

DVDFab 6.2.1.8 “DVD to DVD”:

• Fix: A PathPlayer problem which causes reading error when copying “District 9″.

DVDFab 6218 “Blu-ray to Blu-ray”:

• New: Added support for BD+ protection.
• New: Improved BD-Live removal.
• Fix: PiP(Picture in Picture) Blu-ray disc can be read correctly now.
• Fix: Multi-angle Blu-ray disc can be read correctly now.
• Fix: Backup disc cannot be played in certain cases.
• Fix: An output oversized problem when copying “Main Movie” to BD-25 with “Remove HD Audio” checked in certain cases.
• Fix: Estimated source size is not updated when switching “Remove HD Audio” option.
• Fix: A crash problem when opening Blu-ray disc in certain cases.
• Fix: A crash problem when copying Blu-ray disc in “Main Movie” mode in certain cases.
• Fix: A crash problem at start of “Clone” Blu-ray disc in certain cases.

DVDFab 6218 “DVD to Mobile”:

• New: Updated A/V codecs.
• New: “Video Effect Settings” window is resizable now.
• New: Added “Source Aspect Ratio” option in “Video Effect Settings” window, user can specify “16:9″, “4:3″ or customize it.
• Fix: A crash problem at end of conversion in 2-pass encoding mode.

DVD Fab 6218 “File to Mobile”:

• New: Updated A/V codecs.
• New: “Video Effect Settings” window is resizable now.
• New: Added “Source Aspect Ratio” option in “Video Effect Settings” window, user can specify “16:9″, “4:3″ or customize it.
• Fix: A crash problem at end of conversion in 2-pass encoding mode.

If you already have the old version of DVDFab, you can download and update DVDFab 6218 easily. If you are a new users, don’t miss to get Discount on all product today.

See DVDFab 6205 Update:

• New: Settings window is skinned now.
• New: Updated language files.

DVDFab 6.2.0.5 “DVD to DVD”:

• New: Added support for a new protection as found on “Up”.
• New: Improved PathPlayer to support bonus disc of “Transformers: Revenge of the Fallen”.
• New: DVD writable media size limit was increased to support over burn.

DVDFab 6.2.0.5 “Blu-ray to Blu-ray”:

• New: Blu-ray writable media size limit was increased to support over burn.
• Fix: Main movie title doesn’t be shown in title list in certain cases.
• Fix: A crash problem when opening Blu-ray disc in certain cases.

DVDFab 6.2.0.5 “DVD to Mobile”:

• New: Added “Video Effect Settings” to allow user to adjust video in one UI. More controls like “watermark” will be added later.
• New: Merged “Crop Settings” and “Advanced Resolution Settings” into new “Video Effect Settings” window.

DVDFab 6.2.0.5 “File to Mobile”:

• New: Added “Video Effect Settings” to allow user to adjust video in one UI. More controls like “watermark” will be added later.
• New: Merged “Crop Settings” and “Advanced Resolution Settings” into new “Video Effect Settings” window.

If you have installed the old version of DVDFab, you can easily update DVDFab 6.2.0.5 by installing the most recent version over the older one.

New update from DVDFab Decrypter. DVDFab Decrypter is a simple version of DVDFab “Blu-ray to Blu-ray”and DVDFab “DVD to DVD”. DVDFab Decrypter can copy all DVD/Blu-ray movie to hard drive and delete all the DVD protections (APS, CSS, RC, RCE, UOPs and Sony ARccOS) and part of Blu-ray protections such as AACS, BD+, RC, UOPS and BD-Live.

Now DVD Fab Decrypter is upgraded to  DVDFab HD Decrypter.

Check out DVDFab 6.0.7.0

• New: Updated language files.

DVDFab 6.0.7.0 “DVD to DVD”:

• New: Added support for new copy protections as found on DVDs (Knowing, etc.) from EUROVIDEO, Germany.
• New: Improved PathPlayer performance in certain cases.
• Fix: Playable content may be removed in very special case when PathPlayer is enabled.
• Note: PathPlayer is very stable now, we strongly recommend user to “Always enable PathPlayer”.

DVDFab 6.0.7.0 “Blu-ray to Blu-ray”:

• New: AACS MKB15 (Easy Virtue, US) is fully supported now.
• New: Improved copying performance when there are multiple unit keys.
• Fix: Blu-ray disc cannot be opened when there are certain authoring errors.

If you have installed the old version of DVDFab, you can easily update DVDFab 6.0.7.0 by installing the most recent version over the older one. Doing this will retain your registration information.

New Update by DVDFab

• New: Added popup menu for navigation bar so that more options can be used.
• New: Added auto-run handler for Windows Vista/7 64-bit.
• New: Updated language files.
• Fix: Preview cannot be played when play button be clicked in certain cases.
• Fix: HD Decrypter cannot output ISO file when ImgBurn or Nero is configured.

DVDFab “DVD to DVD”:

• New: Rewrite “Clone” mode to support “Copy Original IFO Files” better.
• New: Improved PathPlayer.
• Fix: A crash problem when opening “The Edge of Love” (US) if PathPlayer is enabled.
• Fix: Several crash problems when opening DVD in certain cases.
• Fix: A PathPlayer problem that playable content (menu) be removed in certain cases.

DVDFab “Blu-ray to Blu-ray”:

• New: Added support for AACS MKB14. Note: user are encouraged to try the new version, even if new disc fails with this version, we can add support for it in one day.
• New: Added support to remove RC, BD-Live and UOPs copy protections for “Clone” mode.
• New: Improved speed when opening Blu-ray disc.
• Fix: A crash problem when opening Blu-ray disc in certain cases.
• Fix: A crash problem when burning Blu-ray in “Full Disc” mode.

DVDFab “DVD to Mobile”:

• New: Added “Apple TV, VOB, AVI, MP4, WMV, MKV, FLV, 3GP” output types in navigation bar.
• Fix: Conversion settings cannot be saved in certain cases.

DVDFab “File to Mobile”:

• New: Added “Apple TV, AVI, MP4, WMV, MKV, FLV, 3GP” output types in navigation bar.
• Fix: Conversion settings cannot be saved in certain cases.

You can download DVDFab 6.0.4.0 now.

• New: Added support for a new copy protection as found on “The Express” (US).
• New: Updated language files.
• Fix: A crash problem when previewing DVD or converting DVD to Mobile in certain cases.
• Fix: An error 400 when copying DVD in certain cases.
• Fix: A freeze problem when copying DVD in certain cases.

• Fix: A crash problem when copying “Wall-E” (US).
• Fix: A problem for “Clone” of “Wall-E” (US).
• Fix: UOPs protection is not removed completely when using “Main Movie” mode.

What’s new on DVD Fab 5.1.2.0:

• New: Improved transcoding speed of “DVD to DVD” mode.
• New: Profile can be changed in “Tast List” window now. (DVDFab Mobile Option)
• New: Improved selection of recommended write speed. DVDFab will use 16x when writer recommends 18x or 20x, and will use 8x when writer recommends 12x or 16x. If you want to use highest possible write speed, you can specify it in “Write Speed” of “Settings -> DVD -> Write” window.
• New: Updated VSO burning engine.
• New: Added support for “AUTO” and “MAX” write speed of ImgBurn.
• New: Updated language files.
• New: Some minor improvements.

Buy DVDFab 5.1.2.0 Now

• New: Improved speed of “Verify disc after finished burning” up to 500%.
• New: Improved cleaning of DVD structure.
• New: Added support for Nero 9 burning engine.
• Fix: “Copy Non-DVD files” was broken from version 5.1.0.0.
• Fix: Drive A and B cannot be recognized as DVD source.
• Fix: Windows 98/Me support was broken for some time, and now it’s back.
• Fix: Second output disc of “Customize Split” will not play correctly on some standalone players.
• Fix: “Verify disc after finished burning” may be skipped.
• Fix: Aspect ratio in small preview window is wrong when source is 4:3.
• Fix: MKV with H264 output cannot be played on some players. (DVDFab Mobile Option)